Same Day Service, Flat-Fee Pricing

House Rewiring Brisbane

Looking for a local house rewiring specialist in Brisbane? We rewire older homes safely and with as little disruption as we can, backed by our Lifetime Workmanship Warranty, so request a site inspection today.

Full & Partial Rewires

Home Rewiring Brisbane, Done Once and Done Properly

Just bought an older home, or had a building inspector or insurer ask about the age of the wiring? House rewiring in Brisbane is the fix when a home’s wiring has outlived its job, and Elite Electrical handles the lot, from full and partial rewires to new circuits, the switchboard, testing and certification. Because one licensed team led by Blaide Knox and Stuart Helmreich does every part of rewiring Brisbane homes, nothing falls between two trades.

Older cable insulation can go brittle, and circuits wired decades ago weren’t designed to run aircon, an induction cooktop, an EV charger and a home office all at once. Electrical Contractor Licence 1503699 covers every job we do, and any call-out fee is confirmed when you book, before we head out.

Our Promise On Every Rewire

We’re Blaide and Stuart, the owners of Elite Electrical, and we know a rewire is a big decision for any household. So we start by testing what you’ve already got. If most of your wiring is sound and only a few circuits need replacing, that’s what we’ll quote. We won’t sell you a full house rewire you don’t need.

You get one flat-fee written quote, and the number on the quote is the number on the invoice, so a bigger job never means a creeping bill. We plan the work around your household, so you know which rooms we’re in and when, and the work is backed by our Lifetime Workmanship Warranty for as long as you own the property.

Blaide Knox & Stuart Helmreich, Owners

Customer opening her front door to an Elite Electrical electrician

What's Included in an Electrical Rewire in Brisbane

Electrical rewiring in Brisbane covers more than new cable. A rewire usually touches the switchboard, every power point and light switch, and the protection on each circuit. We look after each part on the one quote.

New Cable Throughout

Old rubber, cloth-wrapped or brittle cable removed or made safe, and new TPS cable run through the roof space, walls and underfloor.

Power Points & Light Switches

New fittings on every circuit we rewire, plus extra outlets through our power point installation service while the walls are open.

New Circuits for Heavy Loads

Dedicated circuits for an electric oven, induction cooktop, aircon or EV charger, sized for what you run now and what you'll add later.

New Switchboard Where Needed

Old boards with ceramic fuses are usually replaced as part of the job, and the switchboard upgrade sits on the same flat-fee quote.

RCD Protection on Your Circuits

Safety switches (RCDs) fitted as part of the rewire, the same work our safety switch installation service covers, so a fault cuts the power fast.

Testing, Certificate & Handover

Every circuit tested to Australian Standards (AS/NZS 3000) before it goes live, then your certificate and a walk-through of the new setup.

What Homeowners Say After Letting Our Team In

A rewire puts our team inside your walls, roof space and switchboard, so you should know how we treat a home before you book. We hold a 5.0 rating from 180+ Google reviews, and the carousel below shares a few short ones from customers.

Blaide Knox working on a power point above a kitchen bench

Does Your Home Need a Full or Partial Rewire?

A house rewire in Brisbane can mean every cable in the home or just the circuits that have aged badly. These are the types of rewiring work we quote.

Full House Rewires

All cable, power points, switches and lighting circuits replaced, usually with a new board. Best when the whole home is still on its original wiring.

Partial Rewires for Problem Circuits

Selected circuits, one part of the house or a single problem area replaced, when testing shows the rest of the wiring is sound.

Renovation & Extension Rewiring

Rewire the kitchen, bathroom or extension while the walls and ceilings are open, with hardwired alarms fitted on the same visit through our smoke alarm installation service.

Rewiring for New Owners

Just picked up the keys to an older home? We test what's there and sort the wiring the building report flagged before you settle in.

Rewiring for Landlords & Sellers

Getting an older rental or a home for sale ready, with the tired circuits replaced and the paperwork to show the work was done properly.

Upgrades for Modern Power Use

Older circuits brought up to handle aircon, home offices, EV charging and an all-electric kitchen without tripping or running hot.

Blaide Knox at the switchboard in a hallway cupboard

Signs Your Old House Needs Rewiring

If your home still runs on its original cable, its age matters. Homes wired before about the 1960s can still have rubber-insulated (VIR) or lead-sheathed cable, which usually turns brittle with age, and a small number of late 1960s and 1970s homes were wired with aluminium cable, which can loosen at the connections. Not every older home has a problem, but when it’s time to rewire a house in Brisbane, the signs usually show well before anything fails:

  • Lights that flicker or dim when an appliance starts.
  • Power points or switches that feel warm, look scorched or crackle.
  • A burning smell with no obvious source.
  • A switchboard with ceramic or rewireable fuses.
  • Black rubber or cloth-wrapped cable in the roof space.
  • Double adaptors everywhere because there aren’t enough power points.
  • A safety switch that trips again and again.

Not sure? Book an electrical inspection first, and we’ll test what’s there before anyone talks about a rewire.

How Rewiring a House in Brisbane Works

A rewire is bigger than most electrical jobs, so we plan it properly before a single cable comes out. Here’s how rewiring a house runs with us, from the first call to the final test.

Call or Send a Message

Tell us about the home, roughly how old it is and what you've noticed. We'll confirm any call-out fee when you book, before we head out.

Look Through the House

We check the roof space, underfloor, switchboard and existing wiring, and ask what you'd like added while we're there.

Flat-Fee Written Quote

One quote for the whole job, covering whether it's full or partial, the board, any new circuits, and how many working days to expect.

Plan the Days

We agree which rooms we work in on which days, when the power will be off and where any access holes will go.

Rewire Room by Room

Old cable comes out or is made safe, new cable goes in, then the fittings and the board, and we keep you posted along the way.

Test, Certify & Hand Over

Every circuit is tested before it's switched on. You get your certificate and a walk-through, and the balance is paid on completion.

Rewiring Homes Across Brisbane & Surrounds

Our licensed electricians rewire homes across Brisbane, Moreton Bay, Logan, Ipswich and the Redlands:

Why Brisbane Homeowners Choose Elite for Rewiring

Every rewire is done under Electrical Contractor Licence 1503699 and tested to Australian Standards (AS/NZS 3000). We’re a Quality Business Awards 2026 Winner, rated 5.0 on Google, and you can read our five-star customer reviews before you decide. Recent jobs involving rewiring have taken us to Bardon, Nudgee, Mount Gravatt East and Griffin.

Blaide and Stuart founded Elite in 2024 and bring 15+ years on the tools between them. Your rewire is backed by our Lifetime Workmanship Warranty and our We Fix It or It’s Free* promise, so if anything in our rewire isn’t right, we come back free of charge to put it right. And because the same team covers our electrical services as well as aircon and solar, a rewire that’s part of a renovation is easier to plan.

Blaide Knox installing a downlight in a living room ceiling

We’re here to help
request your quote today!

Our experienced team is here to provide reliable solutions tailored to your needs. Contact us today for expert support.

Testimonials

Reviews to Read Before You Book Your Rewire

Old wiring is a job you want fixed properly the first time. Here’s a selection from the 180+ five-star Google reviews that give us a 5.0 rating.

Common FAQs

House Rewiring Questions, Answered

House rewiring is priced on a flat-fee written quote once we’ve seen the home, and the number on the quote is the number on the invoice. What moves the price:

  • The size of the home and how many power points, switches and lights it has.
  • How easy the roof space, walls and underfloor are to reach.
  • A full rewire or a partial one.
  • Whether the switchboard is replaced, and any new circuits.

A 10% booking deposit secures the job, the balance is paid on completion, and Brighte and Zip finance is available, subject to approval.

The three strongest signs are lights that flicker or dim, power points that feel warm or look scorched, and a switchboard with ceramic fuses or black rubber cable in the roof space. If you’re unsure, an electrical inspection shows what’s really behind the walls, so you’re not guessing.

Not automatically. Many 1970s homes still have sound cable, but a few have aluminium wiring, and some have tired connections or no safety switches at all. Testing tells you which camp your home is in, and if only a few circuits need replacing, that’s all we’ll quote.

How long a house rewire in Brisbane takes depends on the size of the home, access through the roof space and underfloor, and whether it’s a full or partial job. A partial rewire is usually quicker. Your quote tells you how many working days to expect, so you can plan around it before anything starts.

That depends on the size of the job and your household. We plan the work room by room and tell you beforehand which circuits will be off and when, so you can sort out the fridge, the home office and any medical equipment. If staying put isn’t practical for part of the job, we’ll say so at the quote.

Yes, when the rest of the wiring tests sound. A partial rewire can cover a kitchen, a bathroom, an extension or a handful of circuits. If testing shows the rest of the house is on old cable too, we’ll tell you straight rather than fix one room and leave the risk behind the walls.

Often, yes. An old board with ceramic fuses or no room for safety switches usually gets replaced as part of a full rewire. It goes on the same flat-fee quote, so you get one number for the whole job rather than two separate bills.

Usually a few small access holes, and good access through the roof space and underfloor means fewer of them. We agree where they’ll go before we start and talk you through how they’ll be finished off, so nothing about the walls or ceilings comes as a surprise.

It depends on the job, the time and where you are. We’ll let you know whether a call-out fee applies, and how much it is, when you book, so there are no surprises. And the number on your quote is the number on your invoice.

Older Home? Let's Talk

Need a Rewiring Quote?

Worried about the wiring in an older home, or planning a renovation? Call us on 0418 645 757 or ask for a flat-fee rewiring quote online, and we’ll look over the house before we price anything. We’ll confirm any call-out fee when you book, before we head out.