Oven Installation Brisbane
Need a new oven or cooktop connected in Brisbane? We install electric and induction appliances in kitchens old and new, backed by our Lifetime Workmanship Warranty, so request a quote today.
New Oven or Cooktop? Get It Connected Properly
New oven sitting in the garage, or has the old one finally given up? Our oven installation Brisbane service gets electric and induction ovens and cooktops connected on the right circuit and working the first time you switch them on. An oven or cooktop is one of the biggest loads in the house, so we check the cable, circuit and switchboard suit it first. Elite Electrical is a licensed team owned by Blaide Knox and Stuart Helmreich.
We work on electric and induction appliances only and don’t do any gas work; a licensed gasfitter handles any gas side. The job is done under Electrical Contractor Licence 1503699, and we’ll confirm any call-out fee when you book, before we head out.
Our Promise On Every Oven & Cooktop Install
We’re Blaide and Stuart, and Elite Electrical is our business. A new oven is a big purchase, and the last thing you need is to find out on install day that your wiring can’t run it. So we look at the model and your switchboard first, and tell you straight whether it’s a simple swap or needs a new circuit.
You get one flat-fee written quote, and the number on the quote is the number on the invoice. Our Lifetime Workmanship Warranty covers our work for as long as you own the home; the appliance stays covered by its manufacturer.
Blaide Knox & Stuart Helmreich, Owners
The Ovens & Cooktops We Install in Brisbane
Our appliance installation Brisbane service covers the cooking appliances that need a licensed electrician. Bought yours from a retailer? Have it on site, ideally unboxed, and we’ll connect it.
Electric Oven Installation Brisbane
Under-bench electric ovens below the cooktop, checked against the cavity size, connected on the right circuit and tested.
Wall Oven Installation Brisbane
Built-in single and double ovens in a cabinet tower, with the cavity and the maker's ventilation gap checked first.
Freestanding Stove Installation
Getting a freestanding oven or stove installed is usually a straight swap. If the outlet behind it needs replacing, power point installation can be done on the same visit.
Ceramic & Electric Cooktops
Cooktop installation in Brisbane kitchens is usually a swap into the existing benchtop cut-out, connected, tested and commissioned.
Induction Cooktop Connections
New induction cooktops connected once we've checked the cable, the breaker and the space on your switchboard can take the load.
Dedicated Circuits & RCBO Protection
A new circuit with its own RCBO when the old one is too small for the new appliance, or shared by the oven and cooktop.
Rated 5.0 on Google by the Customers We've Helped
A hardwired oven or cooktop is wired back to your switchboard, so you want it done by people with a track record. We have a 5.0 rating from 180+ Google reviews. Here’s a short selection from jobs of every kind.
June Rowe
Josh Needham
Jordan Kremer
Greg Brady
Amy Schafer
Ally Drew
Oven Replacement Brisbane & Other Kitchen Jobs
Some jobs are a straight swap. Others are part of a whole new kitchen.
Like-for-Like Oven Replacement
The old oven out and the new one fitted in the same cavity. If the old one kept tripping the power, finding the electrical fault comes first.
New Kitchens & Renovations
Ovens and cooktops wired into a new kitchen layout, with the circuits planned before the cabinetry goes in.
Moving to Induction
A licensed gasfitter handles the gas side. We check the wiring, run any new circuit, and connect and test the induction cooktop.
Oven & Cooktop Together
Both appliances connected and tested in the one booking, on one flat-fee quote, so there's only one visit to organise.
Rental Property Replacements
Landlords and property managers replacing a broken oven or cooktop, with the new one tested before the tenants use it.
Is Your Wiring Ready for an Induction Cooktop?
Induction cooktops draw a lot of power, and many older homes have a cooktop circuit sized for an old ceramic unit, or an oven and cooktop sharing one breaker. Sometimes the existing circuit is fine. Sometimes it needs a new dedicated circuit with its own RCBO, and a board with no safety switches at all can have them added at the same time through our safety switch installation service.
If the board is full or still has old ceramic fuses, a switchboard upgrade may need to come first. The easy way to find out is before you buy, so send us the cooktop model and a photo of your switchboard.
How Your Oven or Cooktop Install Works
Whether it’s a straight swap or a new induction circuit, the checking happens before install day.
Send Us the Details
Call or send through the model or a link to it, plus photos of the old appliance and your switchboard.
Wiring Check
We check the cable, circuit and board against the new appliance's rating, and the cavity or cut-out size.
Flat-Fee Quote
A written quote for the whole job, including any new circuit or RCBO. Any call-out fee is confirmed when you book.
Power Off, Old Unit Out
We isolate the circuit, then disconnect and remove the old oven or cooktop.
Fit & Connect
The new appliance goes in and is connected to the maker's instructions, with any new circuit on your quote.
Test & Handover
We test and commission everything, show you how it runs, and clean up before we leave.
Oven & Cooktop Installs Across Brisbane & Surrounds
Our licensed electricians install electric ovens and cooktops across Brisbane, Moreton Bay, Logan, Ipswich and the Redlands:
Why Choose Elite To Install Your Oven or Cooktop
In Queensland, connecting a hardwired oven or cooktop is electrical work for a licensed electrician. Every install we do is under Electrical Contractor Licence 1503699 and tested before we leave. We’re a Quality Business Awards 2026 Winner, rated 5.0 on Google from 180+ reviews.
It’s backed by the Lifetime Workmanship Warranty and our We Fix It or It’s Free* promise, which means if our installation isn’t right, we come back free of charge to make it right. One licensed team handles all our electrical services, plus aircon installation and solar. Read about the business, founded in 2024 by Blaide and Stuart.
We’re here to help
request your quote today!
Our experienced team is here to provide reliable solutions tailored to your needs. Contact us today for expert support.
Reviews to Read Before You Book Your Install
Your kitchen gets used every day, so the work has to be done properly. These reviews are a small slice of the 180+ five-star ratings we’ve earned on Google.
Josh Needham
June Rowe
Ally Drew
Amy Schafer
Greg Brady
Jordan Kremer
Amanda Bennett
Vivek D
Molly Woodhead
Stella Katras
Oven & Cooktop Installation FAQs
How much does oven installation cost in Brisbane?
Oven installation is priced on a flat-fee written quote before work starts, and the number on the quote is the number on the invoice. Oven installation cost in Brisbane comes down mostly to the wiring. A like-for-like swap costs less than a new layout, and a cooktop that needs a new dedicated circuit or an RCBO costs more, as does a switchboard with little room left. The oven type and width matter too, and whether the cavity suits it. Doing the oven and cooktop together saves a second visit. Brighte and Zip finance is available for renovations, subject to approval.
Do I need an electrician to install my oven?
Yes, for any hardwired oven or cooktop. In Queensland, connecting one is electrical work and must be done by a licensed electrician. A plug-in model still needs an outlet and circuit that suit its rating, and we can check that for you.
Do you do gas work?
No. We install electric and induction ovens and cooktops only. If you’re moving from gas to induction, a licensed gasfitter handles the gas side and we do the electrical side. That means checking your wiring, running a new dedicated circuit if it’s needed, then connecting and testing the cooktop.
Will my wiring handle an induction cooktop?
Often, but not always. Induction cooktop installation in Brisbane homes can mean a new dedicated circuit, an RCBO or switchboard work, because older cooktop circuits can be undersized or shared with the oven. A photo of your switchboard and the model number is usually enough for us to tell you which.
I bought my oven from a retailer. Can you install it?
Yes. Our appliance installation Brisbane service connects electric and induction ovens and cooktops you’ve bought yourself. Have it on site, unboxed if you can, and send us the model first so we can check your circuit suits it.
What if my new oven or cooktop doesn't fit the space?
Check the cavity or benchtop cut-out against the maker’s specs before you buy. Stone benchtops can’t easily be trimmed on site, so a cooktop that’s slightly too big can hold up the job. Send us the measurements and we’ll flag any problem before install day.
Do you charge a call-out fee for an oven install?
That depends on the job, the time and where you are. We’ll let you know whether a call-out fee applies, and how much it is, when you book, so there’s never a surprise. And the number on your quote is the number on your invoice.
Ready To Start Cooking?
Got the new oven or cooktop picked out? Call us on 0418 645 757 or send through the model and a photo of your switchboard, and we’ll come back with a flat-fee quote for oven installation Brisbane wide. Putting in a new rangehood too? We can do the rangehood installation on the same visit.